How to Reset Your Canon Printer with Canon Service Tool V.4720
How to Reset Your Canon Printer with Canon Service Tool V.4720
If you have a Canon printer that is showing an error message such as "ink absorber is full" or "service required", you may need to reset your printer using a software called Canon Service Tool. Canon Service Tool is a program that allows you to perform various maintenance tasks on your Canon printer, such as resetting the waste ink counter, cleaning the printhead, or adjusting the alignment. Canon Service Tool is usually used by authorized service technicians, but you can also use it at your own risk if you know what you are doing.
Canon st4720 with keygen
One of the versions of Canon Service Tool that you can download for free is V.4720. This version supports many models of Canon Pixma printers, such as G1000, G2000, G3000, iX6500, iX6800, iP2700, iP3600, iP4800, iP4900, iP5810, iP7220, Pro9000 Mark II, Pro9500 Mark II, MX410, MX416, MP230, MP250, MP280, MP490, MP540, MG2120, MG2140, MG3150, MG3500, MG4100, MG5140, MG6140, MG8150 and more. You can check the full list of supported printers on the website where you can download Canon Service Tool V.4720.
To use Canon Service Tool V.4720 to reset your Canon printer, you will need a keygen or a serial number to activate the program. A keygen is a software that generates a unique code that you can use to unlock the full features of another software. You can find many keygens online for various programs, but be careful because some of them may contain viruses or malware that can harm your computer. You should always scan any file that you download from the internet with a reliable antivirus program before opening it.
One of the websites where you can download Canon Service Tool V.4720 with keygen for free is https://www.avastudio.org/2018/02/download-canon-service-tool-v4720.html. This website also provides a video tutorial on how to use Canon Service Tool V.4720 to reset your Canon printer. You can watch the video on YouTube at https://www.youtube.com/watch?v=qaX02EEK3s0. However, we do not endorse or guarantee the quality or safety of any files or websites that we link to. Use them at your own risk and discretion.
Here are the steps to reset your Canon printer with Canon Service Tool V.4720:
Download Canon Service Tool V.4720 with keygen from the website mentioned above or any other source that you trust.
Extract the zip file and run the keygen.exe file to generate a serial number for Canon Service Tool V.4720.
Run the ServiceTool_4720.exe file and enter the serial number that you got from the keygen.
Connect your Canon printer to your computer with a USB cable and make sure it is turned on.
Select your printer model from the drop-down menu in Canon Service Tool V.4720.
Click on "Main" under "Clear Ink Counter" section and wait for the process to complete.
Click on "EEPROM" under "Print EEPROM Information" section and print out a report.
Check if the waste ink counter has been reset to zero on the report.
Turn off your printer and disconnect it from your computer.
Turn on your printer again and check if it works normally without any error messages.
Congratulations! You have successfully reset your Canon printer with Canon Service Tool V.4720. We hope this article was helpful and informative for you. If you have any questions or feedback, please leave a comment below. Thank you for reading! 0efd9a6b88
https://www.mushsho.com/group/mysite-231-group/discussion/e59b830c-7552-4b6e-b198-0dc90debc314
https://www.elmstgrill.com/group/art-at-elm-street/discussion/93c8a5b3-69e1-45e5-9a2e-f9bf131296bb