top of page

Grupo az radio

Público·311 miembros
Anthony Edwards
Anthony Edwards

Windows Xp Keygen Activate By Phone

This link just allows you to manually activate the the installation. So you select activate via phone option, then your XP box activation screen will give you a set of numbers. You enter these numbers into the site and the site gives you the response numbers to enter into the XP installation that you are needing to activate. Then you click on "next" and the activation completes.

windows xp keygen activate by phone

I just successfully activated an old copy of Windows XP I had installed using the toll free U.S. phone number listed in the activation dialog (888-571-2048), so it's possible the issue was with the German number and not phone activations in general.

Microsoft Product Activation Assisted Support can be contacted by leveraging the telephone numbers within the product you are trying to activate. To activate by phone, select the relevant product links below:

question then say that i have 2 desktops and 3 hard drives all of them have windows and i take harddrive 3 and make it windows 10 from windows 7 on computer b and then go to computer a and launch the hardrive on it useing its windows 10 why does it now say windows 10 is not activated because that happened to my 1tb that is windows 10 home please help

I previously had a windows 7 home premium original copy which I did bought spending my money. It worked well. After win 10 launch I could successfully upgrade to windows 10 and the copy got activated automatically. There were talks around saying Microsoft is giving away free windows activation this time. So i made a USB copy of windows 10 PRO in to my flash drive and I DID A CLEAN INSTALL FROM THAT VERY COPY. Now I have Windows 10 PRO not activated. I cannot activate this using my windows 7 home premium product key. PLEASE HELP!

Product activation is a simple, straightforward process that is completely software based. It requires no hardware add-ons or any other external tool. In most cases, the only information that is needed to activate a product is an installation ID, which is created by the software itself. The information that is collected during activation will not be used to personally identify the user.If you activate your product over the Internet, product activation takes less than a minute. When you activate your product in this way, the product itself will do most of the work. Very little user effort is required. If you would rather activate your product over the telephone, you can do this by contacting the regional Microsoft Product Activation Center.

Here, the user is given three choices: activate over the Internet, activate over the phone, or activate later. While the activating later option is clear and activating over the Internet is no different than the process described above, activating over the phone brings up a second input screen (Figure D) and requires about five minutes to complete.

I bought a second hand Windows XP to dual boot on my mac computer. I would love to buy a brand new copy but of course it is far too old.It installed and worked fine. The product key worked during installation. However it won't let me activate it and now it says I need to activate it in 2 days to keep using it. This is despite having followed your methods above. All I can think is I accidentally left the computer connected to the internet and it did an auto update or something. It is really frustrating that I payed for a copy of windows xp and now it has stopped working and I lost all my installed programs. I can't get windows 7 or 8 as the programs I want to run won't work and I don't even know if windows 7 or 8 would work well on my mac.

After restart, the windows activation message prompted me again to activated.What do I do now? Wait for the 30 days to be over and see if it works? I see you confirmed this in a message above, but can I do something to verify that it won't block access to my windows in 2 days when activation period expires?Thank you!Ana

Thanks for the tutorial. I have been trying to run a copy of windows XP on a Virtual Machine for a little while, and no matter what I tried it wasn't recognizing my product key, and I couldn't get it to activate at all. I followed your tutorial, and it seems to have worked with one minor glitch. Whenever I log on to the virtual Machine, it still brings me to the activation screen, but the first screen that pops up says "This copy of Windows is already active, Click OK to exit", so I click OK, and it promptly logs me off. Any suggestions?

Following these steps (Activate Now) worked very well with one hiccup: I still get the activation prompt every time - declares windows has been activated, but click OK and it logs the user out immediately. I'm curious to know if anyone has found a way through this.

Hello Eugen,so I have virtualized licence version of windows xp box and used your trick to activate, and worked perfectly fine now since it's a VM ,user ac cess it's through RDP and only problem is system times out means it doesn't ping no RDP when i go the concole of VMWARE and click on vm then it activates and ping and RDP works and as soon console times out both RDP and ping does not workhave you ever heard this before??

My Windows copy stopped working and I'm trying to hack it again! But when I press yes in the question of activating, it says windows already activated and pressing ok brings me back to the login page! so I press enter to login and the message for activation pops up again! So I'm trapped into this circle!

I have followed your guidance above. If I click activate windows it will show "Windows is already activated. click ok to exit".if I press ok then it will goes to welcome windows with the list of user acount.if i choose one of them it goes back to "windows Product Activation" which ask me to activate windows again.could you help to solve this issue?Thank you

I recently installed an old, entirely legal copy of Windows XP in a virtual machine, and it refused to activate via the internet, so I tried the registry hack described above. As others here have said, it only prevents the activation prompt at start-up without actually activating Windows. After 30 days, it still stopped working. I used telephone activation in the end, which wasn't as painful as I expected it to be.

Thank you! Now that I can't activate XP over the internet and I couldn't understand the person at microsoft, Your hack was easier and quicker than using microsoft! I have 2 computers in my workshop and one in the house, there is also one in my boat providing GPS and navigation AND music and digital TV. All XP. I am 69 now and I am not going to spend money on 64 bit replacments or windows 10. Again, thank you!

  • A. When you install XP, you must enter a product key to register the software with Microsoft. However, if you want to use a different key to activate the software after installation (e.g., maybe you originally used an existing key during installation and have since purchased a new license), perform the following steps:Start the activation process as usual (go to Start, All Programs, Accessories, System Tools, then select Activate Windows).

  • Click "Yes, I want to telephone a customer service representative to active Windows," then click Next.

  • Click the "Change Product Key" button.

  • Enter the new key, then click Update.

  • Click Telephone, then continue with the activation.

1 comment Hide comments Comment * Switch to plain text editorMore information about text formats

If you looking on the internet for a Windows XP Product Key So, you come to the right place now a day shares with you all windows XP version product keys or serial keys to get enter and activate windows in 2022. A lot of people daily bases search for windows XP sp2 or sp3 professional edition windows product key because Microsft can not any update Windows XP all for manual work so this post is all about Windows XP how to activate and how to select a product key or lifetime working.

Like previous versions of Windows, Windows 10 can be activated by phone if the online activation fails, although the phone number and activation form are now harder to find. Proceed as follows to activate by phone:

Note : When you format your computer and you reinstalled Windows the same, it is possible that the Internet activation does not work. You will need to use the method by phone to reactivate your Windows.

If you did not enter the serial number of Windows XP during the installation, the wizard will ask you now. If this is the case, enter it and click the "Update" button.Note : If you do not have Internet, you can activate by phone by clicking on the "Phone" button.

If Internet activation is not working, it is possible that this is not the first time you installed Windows XP. In this case, you have to activate by phone.Select the Country where you are and call a phone number 2 is displayed. For information, toll (free) works only from a landline phone.In 2 cases you will come across an answering machine that you require :- Choose your language : French 1 for- If you are an individual or a professional : one for individual- The number of computers on which you installed this copy of Windows : default 1- ...

Most of the users have install Windows XP operating system. Some of them have invalid product key and some have valid product key.Most of the users might be required valid product key for the updation of operating system.The users who have invalid product in their windows and their wants to insert the valid product key. But don't want to format the operating system. So how to insert the valid product key in Windows XP.Just follow these simple steps to insert the valid XP product key in Windows XP.Steps to insert the Valid Product Key in windows XP1) Very first thing you need is the valid product key for windows xp.2) Now click on START Button and then click on RUN3) Now type regedit in run window and click on OKNow you will see the Registry Editor Program Window. 4) Now find for HKEY_LOCAL_MACHINE folder in my Computer.Now click on + (PLUS) sign to expand it.5) Now find the HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Current Version\WPAEvents registry key. Then click Left button of mouse. 6) Now you can see OOBETimerthe in the right window.7) Now simply Right Click on the OOBETimer and select the modify option in it.8) Now simply change the one digit in those values in the value data text box and then click on OK. This will deactivate Windows XP.9) Now simply close the Registry Editor.10) Now again click on START and then click on RUN11) Now type the follwoing command in RUN Window and then click on OK%systemroot%\system32\oobe\msoobe.exe /a12) Now you can see the Window appears named Let's activate Windows.Select the option Yes13) Now you will the option I want to telephone a customer service.This is related to activation of Windows.Then click on Next.14) Now click on change the Product Key button.It will displayed at the bottom of the window.15) Type the new valid product key of Windows XP.16) Then click on Update Button.17) Now you have to reactivate the windows XP product key.Simply follow these steps18) You will see the Phone Window on your computer screen.Simply follow the instruction on the monitor screen.19) Now you can select the option Activate now or Remind me later option.20) After Activating the Windows XP. Even you can verify by the Windows XP by follwoing the steps 10 and 11You can view the windows appears with Windows is ActivatedNow click on OK

Acerca de

¡Te damos la bienvenida al grupo! Puedes conectarte con otro...


bottom of page